Sharp AR-MM9 Service Manual - Page 24

66-7 Purpose Data output, check Function (Purpose) Print the screen memory contents Section FAX Item Data Image data Operation/procedure Press the [START] key. Used to input all image data (including confidential reception data, remote send image, not-sent image) stored in image memory of the FAX section. The output image is remained even after outputting. Note: Executable only when the FAX is installed. 1 66-8 Purpose Operation test/check Function (Purpose) Voice Message send (Signal send level: Max.) (Japan only) Section FAX Item Operation Operation/procedure Select the message number with the 10-key, and press the [START] key. By setting the message No., the sound message is sent to the line and the speaker of the body. (The message is repeated until the interruption command is provided by pressing the [CUSTOM SETTINGS] key.) By pressing the [START] key during execution, the signal kind can be changed. Item Voice message 1 NONE Silent 2 FAX/TEL MSG1 "Hold the line a minute, please send fax." (TEL/FAX voice response) 3 FAX/TEL MSG2 "Hold the line a minute." (TEL/FAX voice response) 4 FAX/TEL MSG3 "Not around here, please send fax." (TEL/FAX voice response) 5 CHANGED RX MSG "Ding Dong" (Sound delivered when switching to remote reception) 6 RINGER Call sound 7 EXT.TEL RINGER External telephone call Message No. 5 can be heard by an external telephone speaker. Note: Executable only when the FAX is installed. 66-9 Purpose Operation test/check Function Used to send the voice message. (Signal send level: (Purpose) Set by soft SW.) (Japan only) Section FAX Item Operation Operation/procedure Select the message number with the 10-key, and press the [START] key. By setting the message No., the sound message is sent to the line and the speaker of the body. (The message is repeated until the interruption command is provided by pressing the [CUSTOM SETTINGS] key.) By pressing the [START] key during execution, the signal kind can be changed. Item Voice message 1 NONE Silent 2 FAX/TEL MSG1 "Hold the line a minute, please send fax." (TEL/FAX voice response) 3 FAX/TEL MSG2 "Hold the line a minute." (TEL/FAX voice response) 4 FAX/TEL MSG3 "Not around here, please send fax." (TEL/FAX voice response) 5 CHANGED RX MSG "Ding Dong" (Sound delivered when switching to remote reception) 6 RINGER Call sound 7 EXT.TEL RINGER External telephone call Message No. 5 can be heard by an external telephone speaker. Note: Executable only when the FAX is installed. 2 66-10 Purpose Adjustment/Setting/Check Function (Purpose) Image data memory clear Section FAX Item Data Image data Operation/procedure Select "1: YES" with the 10-key and press the [START] key. (When "2: NO" is selected, the simulation is canceled.) Used to clear all image data (including confidential reception data) stored in image memory of the FAX section. The management table is also cleared (initialized) at the same time. * lIf there is any print data, the power must be turned off after clearing. Note: Executable only when the FAX is installed. 1 2 AR-FX7 SIMULATION 6 - 8