Sharp AR-MM9 Service Manual - Page 79

List of buzzer sounds in case of FAX abnormality

Page 79 highlights

Result code (Communication result) 62 63 Communication report result column F code bulletin board password discrepancy The other party Communication interruption content When the pass code (PWD) does not coincide in bulletin board, When the other party machine has no function of F code. does not have DIS bit 49 (sub address capacity) in F code transmission, . Check that the other party machine conforms to F code. 64 F code is not When F code is transmitted, accepted. 1) When DCN is received for SUB, check the BOX number. 2) When DCN is received for SID, check BOX number and the pass code. When F code is received, When the F code relay broadcast function or the F code confidential reception function is inhibited with soft switches. 67 F code When the pass code (SID) password does not coincide in F code discrepancy reception, 68 BOX NO. NG When a BOX number that is not registered is instructed (SUB discrepancy) in F code reception, 69 Memory over Memory over in quick online sending • When communication result is OK, the communication result sub code 1 and sub code 2 are 0000. • < > indicates the communication means. , send; , receive; , polling; , bulletin board The status code from the modem in V.34 mode is indicated with the communication result sub code 1 (top 2 digits). However, the communication sub code 1 is 00 in communication other than V.34 mode. Result code 2 02 03 06 07 08 Communication interruption content EOL time over Carrier detection time over Memory image decoding error Memory image decoding error Time up between frames in phase C 11 Polarity reversion detection 12 Invalid command reception 13 Time over (1min timer/6sec timer) 14 PUT error 15 In V.34 mode, time up is generated when shifting from Primary to Control. 16 In V.34 mode, time up is generated when shifting from Control to Primary. 20 Polarity reversion detection 21 Invalid command reception 22 Fall back retry number over 23 Resend over of the number of times of command retry 24 Time over (T5 timer) 25 Time over (T5 timer) in V.34 mode 26 Time over occurrence during shift from Primary to Control in V.34 mode 28 Modem chip answering NG Transmission/ Reception Reception Reception Reception Transmission Transmission/ Reception Reception Reception Reception Reception Reception Reception Transmission Transmission Transmission Transmission Transmission Transmission Transmission Transmission/ Reception 3. List of buzzer sounds in case of FAX abnormality - : Long sound • : Single sound 3: Pause Example: In case of TEL/LIU connection abnormality repeats {Pee • pi • pause • pi • pi • pi • pi}. Beep sound pattern -• •• -•• • Information content Expanded memory connection abnormality Internal DMA transfer abnormality TEL/LIU PWB connection abnormality Program ROM (main section) writing not completed Program ROM (font section) writing not completed Work DRAM (IC13, 14) abnormality Detail Expanded memory insertion abnormality Internal DMA transfer operation abnormality TEL/LIU PWB is not connected to the main PWB. Program ROM (main section) data abnormality Program ROM (font section) data abnormality Work DRAM abnormality SRAM (IC41) abnormality 1 SRAM (IC41) abnormality 2 MCU upload no responding System abnormality 1 System abnormality 2 MCU PWB does not respond. Various internal operation abnormality Various internal operation abnormality Trouble content Expanded memory reinsertion PWB solder trouble, PWB parts trouble Download retry Download retry IC13, 14: PWB solder trouble, PWB parts trouble IC41: PWB solder trouble, PWB parts trouble IC41: PWB solder trouble, PWB parts trouble MCU PWB - main PWB connection PWB solder trouble, PWB parts trouble PWB solder trouble, PWB parts trouble AR-FX7 TROUBLE CODE LIST 10 - 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110

AR-FX7
TROUBLE CODE LIST
10 - 3
When communication result is OK, the communication result sub
code 1 and sub code 2 are 0000.
<
> indicates the communication means. <Send>, send; <Receive>,
receive; <Poll>, polling; <Bulletin>, bulletin board
The status code from the modem in V.34 mode is indicated with the
communication result sub code 1 (top 2 digits). However, the commu-
nication sub code 1 is 00 in communication other than V.34 mode.
<Communication result sub code>
3.
List of buzzer sounds in case of FAX abnormality
62
F code bulletin
board password
discrepancy
When the pass code (PWD)
does not coincide in bulletin
board, <Bulletin>
63
The other party
has no function
of F code.
When the other party machine
does not have DIS bit 49 (sub
address capacity) in F code
transmission, <Send>. Check
that the other party machine
conforms to F code.
64
F code is not
accepted.
When F code is transmitted,
<Send>
1) When DCN is received for
SUB, check the BOX
number.
2) When DCN is received for
SID, check BOX number
and the pass code.
When F code is received,
<Receive>
When the F code relay
broadcast function or the F
code confidential reception
function is inhibited with soft
switches.
67
F code
password
discrepancy
When the pass code (SID)
does not coincide in F code
reception, <Receive>
68
BOX NO. NG
When a BOX number that is
not registered is instructed
(SUB discrepancy) in F code
reception, <Receive>
69
Memory over
Memory over in quick online
sending
Result code
(Communication
result)
Communication
report result
column
Communication interruption
content
Result
code 2
Communication interruption content
Transmission/
Reception
02
EOL time over
Reception
03
Carrier detection time over
Reception
06
Memory image decoding error
Reception
07
Memory image decoding error
Transmission
08
Time up between frames in phase C
Transmission/
Reception
11
Polarity reversion detection
Reception
12
Invalid command reception
Reception
13
Time over (1min timer/6sec timer)
Reception
14
PUT error
Reception
15
In V.34 mode, time up is generated when
shifting from Primary to Control.
Reception
16
In V.34 mode, time up is generated when
shifting from Control to Primary.
Reception
20
Polarity reversion detection
Transmission
21
Invalid command reception
Transmission
22
Fall back retry number over
Transmission
23
Resend over of the number of times of
command retry
Transmission
24
Time over (T5 timer)
Transmission
25
Time over (T5 timer) in V.34 mode
Transmission
26
Time over occurrence during shift from
Primary to Control in V.34 mode
Transmission
28
Modem chip answering NG
Transmission/
Reception
: Long sound
: Single sound
3:
Pause
Example:
In case of TEL/LIU connection abnormality
{{
} repeats {Pee
pi
pause
pi
pi
pi
pi}.
Beep sound
pattern
Information content
Detail
Trouble content
Expanded memory connection
abnormality
Expanded memory insertion abnormality
Expanded memory reinsertion
Internal DMA transfer abnormality
Internal DMA transfer operation
abnormality
PWB solder trouble, PWB parts trouble
TEL/LIU PWB connection abnormality
TEL/LIU PWB is not connected to the
main PWB.
Program ROM (main section) writing not
completed
Program ROM (main section) data
abnormality
Download retry
Program ROM (font section) writing not
completed
Program ROM (font section) data
abnormality
Download retry
Work DRAM (IC13, 14) abnormality
Work DRAM abnormality
IC13, 14: PWB solder trouble, PWB parts
trouble
SRAM (IC41) abnormality 1
IC41: PWB solder trouble, PWB parts
trouble
SRAM (IC41) abnormality 2
IC41: PWB solder trouble, PWB parts
trouble
MCU upload no responding
MCU PWB does not respond.
MCU PWB - main PWB connection
System abnormality 1
Various internal operation abnormality
PWB solder trouble, PWB parts trouble
System abnormality 2
Various internal operation abnormality
PWB solder trouble, PWB parts trouble