Sharp AR-MM9 Service Manual - Page 53

SW Data No. No. Items 1 Scan effective image area 2 (SPF) rear sub scan lead 3 edge image loss 4 5 Scan effective image area 6 (SPF) rear sub scan rear S edge image loss W 120 7 SW selection and functions 1: - Binary input Bit No. Setting range 1: - Binary input Bit No. Setting range 0: + 234 0 to ±56 lines in the interval of 8 lines 0: + 678 0 to ±14 lines in the interval of 2 lines 8 1 Scan effective image area 1: - 2 (SPF) rear main scan left Binary 3 edge image loss input Bit No. S4 Setting range W 121 5 6 Scan effective image area 1: - (SPF) rear main scan right Binary 7 edge image loss input Bit No. 8 Setting range 1 Scan magnification ratio 1: - 2 adjustment SPF (main 3 scan) S4 W 122 5 6 Binary input Bit No. Setting range 7 8 1 Scan magnification ratio 1: - 2 adjustment SPF (sub scan) Binary 3 S4 W 123 5 6 input Bit No. Setting range 7 8 1 Print magnification ratio 1: - 2 adjustment rear (main scan) Binary 3 S4 W 124 5 6 input Bit No. Setting range 7 8 1 Print magnification ratio 1: - 2 adjustment rear (sub scan) Binary 3 S W 4 125 5 6 input Bit No. Setting range 7 8 0: + 234 0 to ±56 dots in the interval of 8 dots 0: + 678 0 to ±56 dots in the interval of 8 dots 0: + 2345678 0 to ±12.7% by increment of 0.1% 0: + 2345678 0 to ±12.7% by increment of 0.1% 0: + 2345678 0 to ±12.7% by increment of 0.1% 0: + 2345678 0 to ±12.7% by increment of 0.1% Default value Remarks 0 0 +0 lines 0 0 +0 lines +0 dots 0 Since the rear edge of the SPF cannot be specified with 0 coordinates, it is pulled after scanning, Since the set value is not a coordinate 0 value, its unit differs from that of the other set values. The value cannot be increased 0 over the coordinates specified in scanning. 0 0 0 0 0 0 +0 dots 0 0 + 0 0 0 0 0% 0 0 0 0 + 0 0 0 0 0% 0 0 0 0 + 0 0 0 0 0% 0 0 0 0 + 0 0 0 0 0% 0 0 0 0 AR-FX7 SOFT SWITCH 7 - 25