Sharp AR-MM9 Service Manual - Page 23

Send level Item Send signal Selection menu 25 2.4 V27t - - 26 0.3 FLG 7EH Flag signal Yes 27 CED2100 Tone signal Yes 28 CNG1100 29 0.3 V21 30 ANSam 31 RINGER Pseudo-ringer sound None ([ON HOOK] key ON) 32 No MSG Voice message (no sound) None Under the state where the ring back tone can be sent to the line, keep the sound composition IC volume to 0. 33 No RBT Ring back tone (no sound) None Under the state where the ring back tone can be sent to the line, keep the G/A volume to 0. 34 DP MAKE Dial pulse (make) 1: 0dB Maintain the make state with keeping 2: Soft SW the condition to be able to send to the dial pulse line. 35 DP BRK Dial pulse (break) 1: 0dB Maintain the break state with keeping 2: Soft SW the condition to be able to send to the dial pulse line. Note: Executable only when the FAX is installed. 1 66-5 Purpose Function (Purpose) Section Item Operation test/check Signal send mode (Signal send level soft SW setting) FAX Operation Operation/procedure Select the signal number with the 10-key, and press the [START] key. By setting the signal number, signals are sent to the line and the machine speaker. (Sending signals is continued until interruption command is made (by pressing [CUSTOM SETTINGS] key.) By entering the signal number and pressing the [START] key during execution, the signal kind can be changed. Signal number Send signal 1 NO SIGNAL Signal not sent 2 33.6 V34 33.6 V34 3 31.2 V34 31.2 V34 4 28.8 V34 28.8 V34 5 26.4 V34 26.4 V34 6 24.0 V34 24.0 V34 7 16.0 V34 16.0 V34 8 19.2 V34 19.2 V34 9 16.8 V34 16.8 V34 10 14.4 V34 14.4 V34 11 12.0 V34 12.0 V34 Send level Selection menu None Send level Signal number Send signal Selection menu 12 9.6 V34 9.6 V34 - 13 7.2 V34 7.2 V34 - 14 4.8 V34 4.8 V34 - 15 2.4 V34 2.4 V34 - 16 14.4 V33 14.4 V33 - 17 12.0 V33 12.0 V33 - 18 14.4 V17 14.4 V17 - 19 12.0 V17 12.0 V17 - 20 9.6 V17 9.6 V17 - 21 7.2 V17 7.2 V17 - 22 9.6 V29 9.6 V29 - 23 7.2 V29 7.2 V29 - 24 4.8 V27t 4.8 V27t - 25 2.4 V27t 2.4 V27t - 26 0.3 FLG 7EH Flag signal Yes 27 CED2100 Tone signal Yes 28 CNG1100 29 0.3 V21 30 ANSam 31 RINGER Pseudo-ringer sound None ([ON HOOK] key ON) 32 No MSG Voice message (no sound) None Under the state where the ring back tone can be sent to the line, keep the sound composition IC volume to 0. 33 No RBT Ring back tone (no sound) None Under the state where the ring back tone can be sent to the line, keep the G/A volume to 0. 34 DP MAKE Dial pulse (make) 1: 0dB Maintain the make state with keeping 2: Soft SW the condition to be able to send to the dial pulse line. 35 DP BRK Dial pulse (break) 1: 0dB Maintain the break state with keeping 2: Soft SW the condition to be able to send to the dial pulse line. Note: Executable only when the FAX is installed. 1 66-6 Purpose Data output, check Function (Purpose) Printing the confidential password Section FAX Item Data Confidential/Pass code Operation/procedure Press the [START] key. The confidential ID table (confidential BOX numbers, confidential BOX names, and confidential password) is printed. The confidential data of My company mode is printed separately. Note: Executable only when the FAX is installed. AR-FX7 SIMULATION 6 - 7