Sharp AR-MM9 Service Manual - Page 35
Sharp AR-MM9 - Memory Board - DRAM Manual
![]() |
UPC - 074000074828
View all Sharp AR-MM9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
SW Data No. No. Items SW selection and functions 1 Make time (10PPS) setup Binary 2 3 S4 W 25 5 Inhibited to use 6 input Bit No. Setting range 1234 26 to 41ms by increment of 1ms 7 8 1 DTMF signal send time Binary 2 3 S4 input Bit No. Setting range 12345 6 (60ms) to 31 (310ms) X (ms) = (N × 10) W5 26 6 Minimum pause time Binary 7 (DTMF) setup 8 input Bit No. Setting range 678 0 (90ms) to 7 (160ms) X (ms) = (N × 10) + 90 1 Inhibited to use 2 Setting of time before dial Binary 3 (DTMF) S4 W input Bit No. Setting range 234 0 (30ms) to 7 (100ms) X (ms) = (N × 10) + 30 27 5 Setting of DPMUTE OFF Binary 6 time after dial 7 8 input Bit No. Setting range 5678 0 (5ms) to 15 (80ms) X (ms) = (N × 5) + 5 1 Pause time setup Binary 2 input Bit No. 1234 3 Setting range 1 to 15sec 4 5 Flash send time Bit No. 56 S W 28 6 90ms 180ms 270ms 360ms 00 01 10 11 7 Line open delay time in dial Bit No. 78 test 2sec 00 3sec 01 8 4sec 10 5sec 11 1 Communication record 1: Yes 0: No table automatic print 2 Time specification of 1: Allowed 0: Inhibited communication record table 3 Sequence of year, month, Bit No. 34 and day on the LCD, the S report, and the sender's W 4 record 29 Year, month, day Month, day, year Day, month, year 00 01 10 11 5 Call time setup in automatic Binary 6 transmission (T0 timer 7 setup) 8 input Bit No. Setting range 5678 30 to 75sec by increment of 5sec 1 Inhibited to use 2 3 S 4 Time specification print Binary W 30 5 (o'clock) on the input Bit No. 6 communication record table Setting range 7 8 45678 00 to 23 o'clock Default value Remarks 40ms 110ms 120ms 50ms 5ms 2sec 90ms 1 1 1 0 0 0 0 0 0 1 0 1 1 0 1 1 0 0 1 0 0 0 0 0 0 When the value is 0 outside the setting 1 range, the initial 0 value is set. 0 fixed 0 0 0 2sec 0 No 0 Inhibited 0 Month, day, year When the value is 0 outside the setting range, the initial value is set. 1 45sec 0 o'clock 0 When the value is 0 outside the setting 1 range, the initial value is set. 1 (Menu setting in the unit of 15sec) 0 0 0 0 When the value is 0 outside the setting 0 range, the initial 0 value is set. 0 AR-FX7 SOFT SWITCH 7 - 7
![](/manual_guide/products/sharp-armm9-service-manual-b289390/35.png)