Sony DCR-DVD300 Operating Instructions - Page 106
Dubbing to a tape, Before operation, When you have finished dubbing
UPC - 027242633155
View all Sony DCR-DVD300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Dubbing a disc to a tape Dubbing to a tape Before operation •Set [DISPLAY] in (OTHERS) to LCD in the SETUP display. (The default setting is [LCD].) •Press the following buttons to make the indicators disappear so that they will not be superimposed on the edited tape: - DISPLAY/BATT INFO - DISPLAY on the Remote Commander - DATA CODE on the Remote Commander 1 Insert the recorded disc into your camcorder. 2 Prepare the VCR for recording. Insert a blank tape (or a tape you want to record over) into the VCR. Set the input selector to LINE. Refer to the operating instructions of the VCR. 3 Play back the recorded disc on your camcorder. 4 Start recording on the VCR. Refer the operating instructions of your VCR. When you have finished dubbing Stop recording on the VCR, then press x on your camcorder. 106