Sony DCR-DVD300 Operating Instructions - Page 120
Types of trouble and corrective action, Others
UPC - 027242633155
View all Sony DCR-DVD300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Types of trouble and corrective action Others Symptom Cause and/or Corrective Actions The disc title cannot be changed. • The disc has been finalized. c Unfinalize the disc (DVD-RW only). You cannot record a disc title on a finalized DVD-R. • The disc title has been made by another device. c The disc title may not be changed on your camcorder if the disc title has been made by another device. Still images cannot be converted to a movie. • When too many still images are recorded, the remaining of the disc is reduced and still images cannot be converted to a movie. c Delete unnecessary scenes in the disc. (page 87) The Remote Commander supplied with your camcorder does not work. • [COMMANDER] is set to [OFF] in (OTHERS) in the SETUP display. c Set it to [ON]. (page 114) • Something is blocking the infrared rays. c Remove the obstacle. • The batteries are inserted in the battery holder with the +/- polarities incorrectly matching the +/- marks. c Insert the batteries correctly. (page 142) • The batteries are dead. c Replace with new ones. (page 142) The picture from a TV or VCR does not appear even when your camcorder is connected to output on the TV or VCR. • [DISPLAY] is set to [V-OUT/LCD] in SETUP display. c Set it to [LCD]. (page 114) • The Visual Index display is displayed. c Press VISUAL INDEX. (page 55) (OTHERS) in the The melody or beep sounds for 5 seconds. • Moisture condensation has occurred. c Turn off your camcorder and leave it for at least an hour to acclimatize it. (page 130) • Some problems have occurred in your camcorder. c Remove the disc and insert it again, then operate your camcorder again. No functions work although the power is on. c Disconnect the power cord of the AC adaptor or remove the battery pack, then reconnect/install it after about one minute. Turn the power on. If the functions still do not work, open the LCD screen and press RESET using a sharp-pointed object. (If you press RESET, all the settings including the date and time return to their defaults.) (page 140) • The temperature of your camcorder is extremely high. c Turn off your camcorder and leave it for a while in a cool place. • Your camcorder was attacked a strong shock or vibration. c Your camcorder may be damaged. Contact your Sony dealer or local authorized Sony service facility. Recording, editing, finalizing, unfinalizing, formatting or ejecting the disc do not work although the power is on. • The temperature of your camcorder is extremely high. c Turn off your camcorder and leave it for a while in a cool place. 120