Sony DCR-DVD300 Operating Instructions - Page 63
Finalizing a disc for other players, Finalizing a disc - instruction manual
UPC - 027242633155
View all Sony DCR-DVD300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Finalizing a disc for other players - Finalizing a disc for other players - Finalizing a disc You have to finalize the disc before you can play a recorded disc on other players such as DVD players. Finalizing makes the recorded disc DVD-Video compatible, and you can play the disc on DVD-Video compatible players. Some players cannot play discs recorded in the VR mode. Make sure of playback compatibility with your players in advance of recording. For details, see the operating instructions supplied with your player. Note that you cannot record again on finalized DVD-Rs. You can record again on DVD-RWs. - In VIDEO mode: the disc is recordable if unfinalized. - In VR mode: the disc is recordable after finalizing. Before finalizing the disc Place your camcorder in a stable position. It takes about a minute to a few hours for finalizing. The shorter the amount of material recorded, the longer it takes for finalizing. The procedure differs between DVD-Rs and DVD-RWs. Notes •Power your camcorder from a wall outlet using the AC adaptor. •If you disconnect the AC adaptor during finalizing, the disc may be damaged. •Do not vibrate your camcorder during finalizing. •Playback may pause between the scenes in some players. 1 Connect the AC adaptor to the DC IN jack on your camcorder, then connect the power cord to the wall outlet. 2 Turn the power on by sliding the POWER switch upward pressing the green button. 3 Press SETUP. MANUAL SET PROGRAM AE P EFFECT D EFFECT WHT BAL AUTO SHTR [ SETUP ] : END 4 Select (DISC SET) with v/V, then press ENTER. DISC SET REC MODE FORMAT FINALIZE UNFINALIZE DISC TITLE RETURN SP REMAIN [ 3min] [ SETUP ] : END 63