Sony DCR-DVD300 Operating Instructions - Page 34
Shooting still images
UPC - 027242633155
View all Sony DCR-DVD300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Shooting movies/still images Shooting still images Perform "Getting Started" from step 1 to 6 beforehand (page 15). The following operation is common with VIDEO mode and VR mode. 7, 8 6 1 3 2 5 4 1 Remove the lens cap by pressing both knobs on the sides of the cap. 2 Install the battery pack or connect the AC adaptor (page 15). 3 Open the LCD screen while pressing OPEN. The image is not displayed in the viewfinder when the LCD screen opens. 4 Set the mode dial to (Still). 5 Turn the power on by sliding the POWER switch upward while pressing the green button. 6 Insert a disc (page 26). This sets your camcorder to standby. FINE 0 -R VIDEO 34
34
Shooting still images
Perform
“
Getting Started
”
from step 1 to 6 beforehand (page 15).
The following operation is common with VIDEO mode and VR mode.
1
Remove the lens cap by pressing both knobs on the sides of the cap.
2
Install the battery pack or connect the AC adaptor (page 15).
3
Open the LCD screen while pressing OPEN.
The image is not displayed in the viewfinder when the LCD screen opens.
4
Set the mode dial to
(Still).
5
Turn the power on by sliding the POWER switch upward while pressing the
green button.
6
Insert a disc (page 26).
This sets your camcorder to standby.
Shooting movies/still images
1
6
4
5
3
2
7, 8
VIDEO
FINE
0
-
R