Sony DCR-DVD300 Operating Instructions - Page 118
Types of trouble and corrective action, During recording and playback
UPC - 027242633155
View all Sony DCR-DVD300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Types of trouble and corrective action During recording and playback Symptom Cause and/or Corrective Actions The power does not turn on. • The battery pack is not installed, or is exhausted or nearly exhausted. c Install a charged battery pack. (page 15) • The AC adaptor is not connected to a wall outlet. c Connect the AC adaptor to a wall outlet. (page 18) The battery pack is quickly discharged. • The operating temperature is too low. • The battery pack is not fully charged. c Charge the battery pack fully again. (page 16) • The battery pack is completely dead, and cannot be recharged. c Replace with a new battery pack. (page 15) The battery remaining time indicator does not indicate the correct time. • You have used the battery pack in an extremely hot or cold environment for a long time. • The battery pack is completely dead, and cannot be recharged. c Replace it with a new battery pack. (page 15) • The battery pack is exhausted. c Install a fully charged battery pack. (page 15) • A problem has occurred in the display of the remaining battery time. c Charge the battery pack fully again so that the indication on the remaining battery time indicator is correct. (page 16) The power goes off although the remaining battery time indicator indicates that the battery pack has enough power to operate. • A problem has occurred in the display of the remaining battery time. c Charge the battery pack fully again so that the indication on the remaining battery time indicator is correct. (page 16) • Battery pack performance decreases in low-temperature surroundings and recording may not be possible even though the battery time remaining may be as much as 20 minutes. c Recharge the battery pack fully. (page 16) Remaining disc space indicator is not displayed. • The [REMAIN] item is set to [AUTO] in (OTHERS) in the SETUP display. c Set it to [ON] to always display the remaining disc space indicator. (page 115) Your camcorder vibrates. • Vibration occurs depending on the condition of the disc. This is not a malfunction. The % indicator flashes. • Moisture condensation has occurred. c Turn off your camcorder and leave it for at least an hour to acclimatize it. (page 130) The indicator flashes. • The temperature of your camcorder is extremely high. c Turn off your camcorder and leave it for a while in a cool place. 118