Sony HDR HC9 Operating Guide - Page 13
Step 2: Charging the battery pack - 1 case
UPC - 027242727717
View all Sony HDR HC9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Step 2: Charging the battery pack Getting Started 2 POWER 1 switch DC IN jack 3 Battery pack DC plug 4 To the wall outlet AC Adaptor (wall socket) Power cord (Mains lead) 4 /CHG (charge) lamp You can charge the "InfoLITHIUM" battery pack (H series) (p. 93) after attaching it to your camcorder. b Notes • You cannot attach any "InfoLITHIUM" battery pack other than the H series to your camcorder. 1 Attach the battery pack to your camcorder. Attach the battery pack by sliding it in the direction of the arrow until it clicks. 2 Slide the POWER switch to OFF (CHG) (the default setting). 3 Connect the AC Adaptor to the DC IN jack of your camcorder. Be sure that the v mark on the DC plug is facing to the v mark on your camcorder. 4 Connect the power cord (mains lead) to the AC Adaptor and the wall outlet (wall socket). The /CHG (charge) lamp lights up and charging starts. The /CHG (charge) lamp turns off when the battery is fully charged. b Notes • Disconnect the AC Adaptor from the DC IN jack holding both the camcorder and the DC plug. z Tips • You can operate your camcorder connected to a power source such as a wall outlet (wall socket) as shown in the illustration. The battery pack will not lose its charge in this case. Continued , 13