Sony HDR HC9 Operating Guide - Page 70

Marking images on the "Memory Stick Duo" with specific information (Print mark/Image protection) When you are using a "Memory Stick Duo" with the write-protect tab, make sure the write-protect tab on the "Memory Stick Duo" is not set to the write-protect position (p. 92). Selecting still images for printing (Print mark) The DPOF (Digital Print Order Format) standard is used to select images for printing on your camcorder. By marking images that you want to print out, you do not need to reselect them when you print them out (You cannot specify the number of printouts). 1 Slide the POWER switch repeatedly to turn on the PLAY/ EDIT lamp. 2 Touch tt t [PRINT MARK]. This may change the information of the images with the Print mark put on using the other device. Preventing accidental erasure (Image protection) You can select and mark images to prevent accidental erasure. 1 Slide the POWER switch repeatedly to turn on the PLAY/ EDIT lamp. 2 Touch tt t [PROTECT]. 3 Touch the image that you want to protect. PROTECT appears. 3 Touch the image that you want to print out later. PRINT MARK appears. 101-0002 2/ 10 101 OK 4 Touch t [END]. 101-0002 2/ 10 101 OK 4 Touch t [END]. b Notes • To cancel image protection, touch the image again to cancel image protection in step 3. b Notes • To cancel Print mark, touch the image again to cancel Print mark in step 3. • Do not mark images on your camcorder if the "Memory Stick Duo" already has some images with the Print mark put on using other devices. 70