Sony HDR HC9 Operating Guide - Page 33

Recording/Playback 1 During playback, press ZERO SET MEMORY on the Remote Commander at a point you want to locate later on. The tape counter is reset to "0:00:00" and appears on the screen. 6 0 min 0:00:00 GUIDE P-MENU If the tape counter is not displayed, press DISPLAY. 2 Press STOP when you want to stop playback. 3 Press mREW. The tape stops automatically when the tape counter reaches "0:00:00." The tape counter returns to the time code display, and the zero set memory display disappears. 4 Press PLAY. Playback starts from the point designated "0:00:00" on the tape counter. • Zero set memory will not function correctly if there is a blank section between recorded sections on the tape. Searching for a scene by date of recording (Date search) You can locate the point where the recording date changes. Slide the POWER switch repeatedly to turn on the PLAY/EDIT lamp (p. 28). SEARCH M. ./> STOP 1 Press SEARCH M. on the Remote Commander. 2 Press .(Previous)/>(Next) to select a recording date. 6 0 min 0:00:00:00 6 0 min DATE -01 SEARCH GUIDE P-MENU To cancel the operation Press ZERO SET MEMORY again before rewinding. b Notes • There may be a discrepancy of several seconds between the time code and the tape counter. To cancel the operation Press STOP. b Notes • The Date search will not function correctly when there is a blank section between recorded sections on the tape. 33