Sony HDR HC9 Operating Guide - Page 60
Aguideframe Bcenter Markr Ccolor Bar Ddata Code Eremaining Fremote Ctrl Remote Control
UPC - 027242727717
View all Sony HDR HC9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
STANDARD SET menu (Continued) GUIDEFRAME You can display the frame and check that the subject is horizontal or vertical by setting [GUIDEFRAME] to [ON]. The frame is not recorded. Press DISPLAY/ BATT INFO to make the frame disappear. z Tips • Placing the subject at the cross point of the guide frame makes a balanced composition. CENTER MARKR When you set [CENTER MARKR] to [ON], the marker is displayed at the center of the screen so you can identify the center of the screen easily. The marker is not recorded. Press DISPLAY/BATT INFO to make the marker disappear. COLOR BAR You can display the color bar or record it on the tape by setting [COLOR BAR] to [ON]. It is convenient to adjust the color on the monitor connected. DATA CODE During playback, displays the information (data code) recorded automatically at the time of recording. B OFF Data code is not displayed. DATE/TIME Displays the date and time. CAMERA DATA (below) Displays camera setting data. 6 0 min 1 0 : 0 0 : 0 0 : 0 0 60min 2 GUIDE AUTO 100 AWB F1. 8 9 dB P-MENU 3 6 54 60 A SteadyShot off B Exposure C White balance D Gain E Shutter speed F Aperture value b Notes • The exposure adjustment value (0EV), a shutter speed, and the aperture value appear when still images on a "Memory Stick Duo" are played back. • appears for a picture recorded using a flash. • In the DATE/TIME data display, the date and time are displayed in the same area. If you record a picture without setting the clock and [--:--:--] will appear. • During Easy Handycam operation, you can set only [DATE/TIME]. REMAINING B AUTO Displays the remaining tape indicator for about 8 seconds in situations such as those described below. • When you set the POWER switch to PLAY/ EDIT or CAMERA-TAPE with a cassette inserted. • When you touch (Play/Pause). ON Always displays the remaining tape indicator. REMOTE CTRL (Remote control) The default setting is [ON], allowing you to use the supplied Remote Commander (p. 106). z Tips • Set to [OFF] to prevent your camcorder from responding to a command sent by remote control units of other camcorders or VCRs.