Sony NW-A35HN User Manual - Page 12

Charging the battery

Page 12 highlights

Turning the screen on or off. Turning on the Walkman (3 seconds). Restarting the Walkman (8 seconds). To enable the screen operation You can enable the touch-screen operation while the HOLD function is active. 1. Tap the menu items in the following order. - [Settings] - [Device Settings] ([Basic Settings]). 2. Tap [Disable touch panel when the HOLD switch is on] to remove a check mark. If you want to prevent accidental touch-screen operations, add a check mark again. Hint Slide the switch ( ) in the opposite direction of the arrow to release the HOLD function. While the HOLD function is active, will flash when you operate a button. When the HOLD function is enabled, you cannot turn off the Walkman. Release the HOLD function. The contents of the Help Guide may be subject to change without notice due to updates to the product's specifications. [12] Power/Charging Charging the battery 1 Connect the Walkman to a running computer via USB. The charge lamp will light up. When charging is complete, the battery status icon switches to . Then, the charge lamp turns off. 2 Disconnect the Walkman from the computer. Hint

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94

To enable the screen operation
You can enable the touch-screen operation while the HOLD function is active.
Hint
Slide the switch (
) in the opposite direction of the arrow to release the HOLD function.
While the HOLD function is active,
will flash when you operate a button.
When the HOLD function is enabled, you cannot turn off the Walkman. Release the HOLD function.
[12] Power/Charging
Charging the battery
Hint
Turning the screen on or off.
Turning on the Walkman (3 seconds).
Restarting the Walkman (8 seconds).
Tap the menu items in the following order.
– [Settings] – [Device Settings] ([Basic Settings]).
1.
Tap [Disable touch panel when the HOLD switch is on] to remove a check mark.
If you want to prevent accidental touch-screen operations, add a check mark again.
2.
The contents of the Help Guide may be subject to change without notice due to updates to the product's
specifications.
Connect the Walkman to a running computer via USB.
The charge lamp will light up.
When charging is complete, the battery status icon switches to
.
Then, the charge lamp turns off.
1
Disconnect the Walkman from the computer.
2