Sony PEG-NX73V CLIE Handbook - Page 109
Performing the IR HotSync, operation, To restore the local HotSync settings, Local - u connection with pc
View all Sony PEG-NX73V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Performing the IR HotSync® operation Performing the IR HotSync® operation You can perform the IR HotSync® operation when you have prepared your computer settings, CLIÉ handheld settings, and Conduit Setup. 1 Rotate the Jog Dial™ navigator to select the HotSync icon on the Application Launcher screen and press the Jog Dial™ navigator. The HotSync screen is displayed. Tip You can also tap the HotSync icon to display the HotSync screen. 2 Tap Local. 3 Tap the arrow V and select IR to a PC/Handheld. 4 Point the IR port of your CLIÉ handheld directly to the IR port of the computer. For best results, your computer and your CLIÉ handheld should be 4 to 8 inches (approximately 10 to 20 centimeters) apart, and the path between your CLIÉ handheld and the computer must be clear of obstacles. 5 Tap the HotSync icon. The HotSync® operation starts. A message will be displayed when the HotSync® operation is complete. To restore the local HotSync settings When performing the local HotSync® operation with the cradle, you need to restore the local HotSync settings. 1 Connect the cradle to your computer. 2 Click the HotSync icon in the Windows task tray (at the bottom right of the taskbar) and select Local USB from the shortcut menu. Exchanging and updating files/data using the HotSync® 109 operation (Other HotSync® operations)