Sony PEG-NX73V CLIE Handbook - Page 116
Preparing your CLIÉ handheld, Performing the HotSync, operation viamodem
View all Sony PEG-NX73V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Performing the HotSync® operation via a modem 5 Adjust the following settings as needed. • Serial port: Specifies the port for the modem. If you are not sure of the port settings, check the Modem Properties (Phone and Modem Options for Windows 2000 Professional/XP) in the Control Panel. • Speed: Determines the speed at which files/data are transferred. Try the As Fast As Possible rate first, and adjust downward if you have any problems. • Modem: Specifies the modem type or manufacturer. If you are not sure of your modem type or if you cannot find your modem type in the list, select Hayes Basic. • Setup string: Identifies the setup string for your modem automatically if you specify the modem type or manufacturer. If it does not work properly, refer to the manual of your modem. 6 Click OK. Preparing your CLIÉ handheld Follow the steps below to set up your CLIÉ handheld for a modem HotSync® operation. 1 Rotate the Jog Dial™ navigator to select the HotSync icon on the Application Launcher screen and press the Jog Dial™ navigator. The HotSync screen is displayed. Tip You can also tap the HotSync icon to display the HotSync screen. 2 Tap Modem. Exchanging and updating files/data using the HotSync® operation (Other HotSync® operations) Continued on next page 116