Western Digital My Cloud PR4100 User Manual - Page 112
Appendix F: Replacing the SO-DIMM Memory Module, Replacing a SO-DIMM Memory Module
View all Western Digital My Cloud PR4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
APPENDICES Appendix F: Replacing the SO-DIMM Memory Module Note: This procedure is applicable for the My Cloud PR4100 only. The SO-DIMM memory module in the My Cloud device is upgradeable. The My Cloud device must be powered off prior to module replacement. For details about the supported memory module, refer to http://support.wdc.com. What you'll Need: Phillips screwdriver Replacement SO-DIMM Memory module Replacing a SO-DIMM Memory Module 1. Before getting started, shut down the My Cloud device and disconnect all external connections. 2. Place the unit on a clean and stable surface, with the back of the unit facing you. 3. Release three (3) screws on the back of the unit (Figure 1). Figure 1. Unscrew and remove unit cover 4. Pull the unit cover toward you and up to release the cover. (Figure 1) MY CLOUD USER MANUAL 106