Western Digital My Cloud PR4100 User Manual - Page 113
replace and tighten the three 3 exterior screws., Connect all external connections.
View all Western Digital My Cloud PR4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
APPENDICES 5. Remove and replace the SO-DIMM memory module. Note: This device uses memory modules in coordinated pairs. For a list of supported memory modules, refer to http://support.wdc.com. Figure 2. Replace 4PL-SO-DIMM module 6. Once the pair of SO-DIMM memory modules have been changed, replace the unit cover and replace and tighten the three (3) exterior screws. Note: When replacing the cover back to the unit, be careful not to touch or damage the components on the PCBA. Note: Do not over-tighten the PCBA screws. 7. Connect all external connections. 8. Restart the device. MY CLOUD USER MANUAL 107
APPENDICES
107
MY CLOUD USER MANUAL
5.
Remove and replace the SO-DIMM memory module.
Note:
This device uses memory modules in coordinated pairs. For a list of supported
memory modules, refer to
.
Figure 2.
Replace 4PL-SO-DIMM module
6.
Once the pair of SO-DIMM memory modules have been changed, replace the unit cover and
replace and tighten the three (3) exterior screws.
Note:
When replacing the cover back to the unit, be careful not to touch or damage the
components on the PCBA.
Note:
Do not over-tighten the PCBA screws.
7.
Connect all external connections.
8.
Restart the device.