Xerox 1235N Troubleshooting Guide - Page 105

Troubleshooting Front Panel Messages (cont'd.) Message Transfer Belt Near End Of Life Tray I/F Error [Tray 2 I/F Error U14] [Tray 3 I/F Error U13] Power Off/On Tray Misfeed [Tray 1 Misfeed] [Tray 2 Misfeed] [Tray 3 Misfeed] Open Tray, Cover B Tray Paper Low [Tray 1 Paper Low] [Tray 2 Paper Low] [Tray 3 Paper Low] Type Attention Fault Fault Attention Explanation/Corrective Action The transfer belt is near its end of life. Printing can continue until the printer determines that the transfer belt is at its end of life; however, some degradation of image quality may occur. The message remains until interrupted by other messages or until the transfer belt is replaced. An error has been detected with the indicated tray's interface and communication path. Turn off the printer, wait 15 seconds, then turn on the printer. If the problem persists, check the support links at www.xerox.com/officeprinting/1235support. Paper did not exit the indicated tray properly, causing a paper jam. Pull out the tray, retrieve and discard the misfed paper and reinsert the tray. Open Cover B to search for additional paper. You must open Cover B to clear the misfeed message on the front panel. The printer has detected that the paper level in the indicated tray is low. Printing can continue until the tray runs out of paper. Reload the tray as soon as possible to avoid printing interruptions. Advanced Features and Troubleshooting Manual 89