Xerox 1235N Troubleshooting Guide - Page 92
Making Adjustments, Black Density Adjustment, Item Up, Item Down
![]() |
UPC - 042215474580
View all Xerox 1235N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Maintaining the Printer Making Adjustments Use the following procedures to make adjustments to the color density and balance: Black Density Adjustment 1 Press Item Up† or Item Down until you see: Color Adjust Menu Black Density 2 Press Value Up or Value Down until you see: Black Density = New Value Values are -3K, -2K, -1K, 0, +1K, +2K, +3K. 3 Press Enter. The Color Adjust Page prints and the front panel displays: Color Adjust Menu Black Density 4 Repeat Steps 2 and 3 above until you are satisfied with the results. To exit this menu, scroll to Exit with the Item button and select YES with the Value button. Color Density Adjustment 1 Press Item Up† or Item Down until you see: Color Adjust Menu Color Density 2 Press Value Up or Value Down until you see: Color Density = New Value Values are -3CMY, -2CMY, -1CMY, 0, +1CMY, +2CMY, +3CMY. 3 Press Enter. The Color Adjust Page prints and the front panel displays: Color Adjust Menu Color Density 4 Repeat Steps 2 and 3 above until you are satisfied with the results. 5 To exit this menu, scroll to Exit with the Item button and select YES with the Value button. † Note that the buttons have graphics and numbers only (no written labels) on the 220 V models of the printer. Please see Front Panel Layout on page 39 for button numbers and graphics. 76 Phaser 1235 Network Color Printers
![](/manual_guide/products/xerox-1235dx-troubleshooting-guide-0f88fcb/92.png)