Xerox 1235N Troubleshooting Guide - Page 119
Advanced Features and Troubleshooting Manual, Using Printer Options, secure the controller board.
UPC - 042215474580
View all Xerox 1235N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Using Printer Options 3 Peel backing from insulating paper. Align the insulating paper to match the shape of the bottom of the hard drive. Press it in place on the bottom of the hard drive 4 Place the hard drive in position on the circuit card assembly. 5 Align the hard drive carefully so that the rightmost four pins on the hard drive are to the right of the connector on the circuit card assembly and slide it firmly in place. 6 Secure the hard drive in place using four screws. If the screws don't line up correctly with the holes in the bottom of the hard drive, check alignment of the hard drive as indicated in step 5 above. 7 Align the controller board with the printer's guide channel and slide the board all the way into the printer until it stops. Then replace the screws to secure the controller board. 8 Reconnect the power cord and all cables and turn on the printer. 9 Print a Configuration Sheet (as described on page 45) and confirm that the hard drive appears as an installed option. If any problems occur, reinstall the drive. If problems persist, check the support links at www.xerox.com/officeprinting/1235support for assistance. Advanced Features and Troubleshooting Manual 103