Xerox 1235N Troubleshooting Guide - Page 29
Loading Print Media
UPC - 042215474580
View all Xerox 1235N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Loading Print Media Loading Print Media Selecting Print Media This chapter will help you understand what kinds of paper and other print media to use with the printer and also how to properly position the media in the printer's paper trays. The printer supports a variety of media types and sizes. I Supported media and media sizes on page 15 lists the sizes of paper, envelopes and other print media for use with the printer's paper trays. I The printer supports weights of paper as follows: I 60-176 g/m2 (16-47 lb. bond) via the standard and optional paper trays I 60-203 g/m2 (16-54 lb. bond) via the Multi-sheet Bypass Feeder (MBF) I 75-105 g/m2 (20-28 lb. bond) for automatic 2-sided printing via the MBF I Media especially sensitive to curl (transparencies, labels, etc.) should be output to the face-up bin at the rear of the printer instead of to the standard face-down bin on top of the printer. I To use the printer's automatic 2-sided printing capability: I The optional duplex module must be installed. I Only media with a weight from 75 to 105 g/m2 (20-28 lb. bond) should be used. All other media weights must be printed 1-sided. Note Do not attempt 2-sided printing on transparencies, labels, envelopes, postcards, card stock or glossy paper. The Multi-sheet Bypass Feeder will not feed media heavier than 28 lb. bond paper. I The paper must feed from a 530-sheet tray (Tray 1, Tray 2 or Tray 3). If paper is fed from the Multi-Sheet Bypass Feeder, it may not be printed 2-sided automatically, but may be printed 2-sided manually. I Use only Xerox Phaser 35 Series transparencies as other transparencies may cause damage to the fuser. Any damage caused due to the use of unsupported media will not be covered by your printer's warranty. Advanced Features and Troubleshooting Manual 13