Xerox 1235N Troubleshooting Guide - Page 84

Managing Printer Usage Front Panel Menus, Items and Values (cont'd.) Menu Print Description and Items Allows you to generate printer reports: Startup Page Prints the Startup Page. Config Sheet Prints the configuration sheet showing the printer's current information and menu settings. PCL Font List Prints a complete list of all PCL fonts currently loaded. PS Font List PS Demo Page Prints a complete list of all PostScript language fonts currently loaded. Prints a PostScript demonstration page that shows the printer features. Menu Map Prints a page showing the configuration of the front panel Menu tree. System Event Prints a list of the last 100 printer events (as shown in the Log Service Menu - Show Event History section on page 67. Disk Directory Prints a list of fonts and macros loaded on the hard drive. Print Quantity Sets the number of times each printer report page is printed (uncollated). Note Select Tray Hex Mode This value is reset to 1 upon exiting the menu. Selects the source tray from which the printer report is to be printed (and appears only if the optional Tray 2/Tray 3 is installed). Enables or disables Hex dump mode, which prints the data stream as Hex codes instead of interpreting it as print data. Available values are: Yes No* Restart Printer Note The printer must be restarted (use either Restart Printer or power the printer off and on) to exit Hex mode. Reboots the printer as if the power was switched on and off, but bypasses the power on diagnostics. 68 Phaser 1235 Network Color Printers