Xerox 1235N Troubleshooting Guide - Page 72
Paper Size, Form Length, Phaser 1235 Network Color Printers, Managing Printer Usage, Collation, Inches
UPC - 042215474580
View all Xerox 1235N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Managing Printer Usage Front Panel Menus, Items and Values (cont'd.) Menu System (cont) Description and Items Policy Timeout If a job is received that requires resources (paper size and type) not loaded in the printer, this feature specifies how long the printer will wait before implementing the specified Page Policy. Print Quantity Duplex Note Longer durations are typically set to allow you time to change the paper in the printer to match the submitted job's requirements. Available values are: 300 Seconds* 180 Seconds 120 Seconds 60 Seconds 30 Seconds Immediately Sets multiple copies of each page (not collated sets). Available values are: 1* - 999 Appears only when the duplex option is installed and enables or disables duplex (two-sided) printing. Available values are: Off* Long Edge Short Edge Power Saver Defaults Startup Page Enable Note "Long Edge" and "Short Edge" refer to binding orientation, not paper feed direction. For more information on duplex printing and binding orientation, see the section Collation on page 29. Defines a period of inactivity after which time the printer will enter a low power state. Available values are: 240 Minutes 180 Minutes 120 Minutes 90 Minutes 60 Minutes 30 Minutes* 15 Minutes Sets the default values for the System Menu's Paper Size item and the PCL Menu's Form Length item. Available values are: Inches WMhienllseitmteotInecrhses, Paper Size defaults to Letter and Form Length defaults to 60. When set to Millimeters, Paper Size defaults to A4 and Form Length defaults to 64. Determines whether a startup page prints each time the printer restarts. Available values are: On* Off 56 Phaser 1235 Network Color Printers