Xerox 1235N Troubleshooting Guide - Page 77
Advanced Features and Troubleshooting Manual, Managing Printer Usage, Setting Network Addressing
![]() |
UPC - 042215474580
View all Xerox 1235N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Managing Printer Usage Front Panel Menus, Items and Values (cont'd.) Menu Ethernet (cont) Description and Items HTTP Enable Enables or disables the Ethernet HTTP Server protocol. Available values are: On* Off IPP Enable Enables or disables the Ethernet IPP protocol. Available values are: On* Off IP Address Res Sets the method used to assign the IP address, including Sub Net Mask and Default Gateway. Available values are: Static BOOTP/RARP DHCP* IP Address Sets the 4 byte IP address. Available values are: xxx.xxx.xxx.xxx (where xxx = 000 to 255) Note See the section Setting Network Addressing on page 48 for an explanation of how to set this item. Sub Net Mask Sets the 4 byte Sub Net Mask address. Available values are: xxx.xxx.xxx.xxx (where xxx = 000 to 255) See the section Setting Network Addressing on page 48 for an explanation of how to set this item. Default Gateway Sets the 4 byte Default Gateway address. Available values are: xxx.xxx.xxx.xxx (where xxx = 000 to 255) Note See the section Setting Network Addressing on page 48 for an explanation of how to set this item. Port Timeout Sets the time for determining when to terminate an incomplete print job and poll the next port in the polling sequence. Available values are: Speed 5 - 300 seconds (60* seconds) Sets the speed of the optional 100 Mbit Ethernet interface. Available values are: Auto* 10/HALF 10/FULL 100/HALF 100/FULL HALF = half duplex FULL = full duplex Advanced Features and Troubleshooting Manual 61
![](/manual_guide/products/xerox-1235dx-troubleshooting-guide-0f88fcb/77.png)