Xerox 1235N Troubleshooting Guide - Page 109

the printer, wait 15 seconds, then turn on the, printer. If the problem persists, check the support

Get Xerox 1235N - Phaser Color Laser Printer PDF manuals and user guides
UPC - 042215474580
View all Xerox 1235N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 109 highlights

Troubleshooting Printer Management Status Messages (cont'd.) Message Jn-Toner Empty [J9-Yellow Toner Empty] [J10-Magenta Toner Empty] [J11-Cyan Toner Empty] [J12-Black Toner Empty] Load Tray #, Size Type Type Fault Fault T1-Fuser Upper Error Fault T2-Fuser Lower Error Fault T29-Temp Sensor Error Fault T30-RH Sensor Error Fault T31-Roller Over Error Fault T32-LED Over Temp Error Fault Explanation/Corrective Action The toner cartridge has reached its end of life. Install a new toner cartridge. The specified paper size and type requested by the print job is not available in the specified tray. Load the specified paper or press Enter to print anyway from the tray. A short fault in the upper fuser Thermistor was discovered. Turn off the printer, wait 15 seconds, then turn on the printer. If the problem persists, install a new fuser. For further assistance, visit the support links at www.xerox.com/officeprinting/1235support. A short fault in the lower fuser Thermistor was discovered. Turn off the printer, wait 15 seconds, then turn on the printer. If the problem persists, install a new fuser. For further assistance, visit the support links at www.xerox.com/officeprinting/1235support. The temperature sensor is either not communicating or reporting invalid data. To reset the sensor, open and close the top cover. If the problem persists, check the support links at www.xerox.com/officeprinting/1235support. The relative humidity sensor is either not communicating or reporting invalid data. Turn off the printer, wait 15 seconds, then turn on the printer. If the problem persists, check the support links at www.xerox.com/officeprinting/1235support. The fuser temperature sensor is reporting a temperature error. Turn off the printer, wait 15 seconds, then turn on the printer. If the problem persists, install a new fuser. For further assistance, visit the support links at www.xerox.com/officeprinting/1235support. One of the LED bars is reporting a temperature error. Turn off the printer, wait 15 seconds, then turn on the printer. If the problem persists, check the support links at www.xerox.com/officeprinting/1235support. Advanced Features and Troubleshooting Manual 93

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
Advanced Features and Troubleshooting Manual
93
Troubleshooting
J
n
-Toner Empty
[J9-Yellow Toner Empty]
[J10-Magenta Toner
Empty]
[J11-Cyan Toner Empty]
[J12-Black Toner Empty]
Fault
The toner cartridge has reached its end of life.
Install a new toner cartridge.
Load Tray
#
,
Size
Type
Fault
The specified paper size and type requested by the
print job is not available in the specified tray.
Load the specified paper or press
Enter
to print
anyway from the tray.
T1-Fuser Upper Error
Fault
A short fault in the upper fuser Thermistor was
discovered. Turn off the printer, wait 15 seconds,
then turn on the printer. If the problem persists,
install a new fuser. For further assistance, visit the
support links at
www.xerox.com/officeprinting/1235support
.
T2-Fuser Lower Error
Fault
A short fault in the lower fuser Thermistor was
discovered. Turn off the printer, wait 15 seconds,
then turn on the printer. If the problem persists,
install a new fuser. For further assistance, visit the
support links at
www.xerox.com/officeprinting/1235support
.
T29-Temp Sensor Error
Fault
The temperature sensor is either not
communicating or reporting invalid data. To reset
the sensor, open and close the top cover. If the
problem persists, check the support links at
www.xerox.com/officeprinting/1235support
.
T30-RH Sensor Error
Fault
The relative humidity sensor is either not
communicating or reporting invalid data. Turn off
the printer, wait 15 seconds, then turn on the
printer. If the problem persists, check the support
links at
www.xerox.com/officeprinting/1235support
.
T31-Roller Over Error
Fault
The fuser temperature sensor is reporting a
temperature error. Turn off the printer, wait 15
seconds, then turn on the printer. If the problem
persists, install a new fuser. For further assistance,
visit the support links at
www.xerox.com/officeprinting/1235support
.
T32-LED Over Temp Error
Fault
One of the LED bars is reporting a temperature
error. Turn off the printer, wait 15 seconds, then
turn on the printer. If the problem persists, check
the support links at
www.xerox.com/officeprinting/1235support
.
Printer Management Status Messages (cont'd.)
Message
Type
Explanation/Corrective Action