Xerox 1235N Troubleshooting Guide - Page 108
Enter, data from being written. Press
UPC - 042215474580
View all Xerox 1235N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Troubleshooting Printer Management Status Messages (cont'd.) Message EE-Transfer Belt Unit Missing Type Fault EF-Fuser Unit Missing Fault H1-Hard Disk Read Error Attention H2-Hard Disk Write Error Attention H3-Hard Disk Full Attention H4-Hard Disk Formatting Attention H5-Hard Disk Initializing Attention J3-Replace Fuser Fault J4-Replace Transfer Belt Fault Jn-Replace Drum Fault [J5-Replace Yellow Drum] [J6-Replace Magenta Drum] [J7-Replace Cyan Drum] [J8-Replace Black Drum] Explanation/Corrective Action The transfer belt is either missing or requires reseating to be recognized by the printer. Turn off the printer, make sure the transfer belt is properly installed and turn on the printer. If the problem persists, check the support links at www.xerox.com/officeprinting/1235support. The fuser is either missing or requires reseating to be recognized by the printer. Turn off the printer, make sure the fuser is properly installed and turn on the printer. If the problem persists, install a new fuser. For further assistance, visit the support links at www.xerox.com/officeprinting/1235support. There was a hard disk read error that prevented the data from being read. Press the Enter button to clear the message. Turn off the printer, wait 15 seconds, then turn on the printer. If the problem persists, visit the support links at www.xerox.com/officeprinting/1235support for further assistance. There was a hard disk write error that prevented the data from being written. Press the Enter button to clear the message. Turn off the printer, wait 15 seconds, then turn on the printer. If the problem persists, visit the support links at www.xerox.com/officeprinting/1235support for further assistance. There was a hard disk full error that prevented the data from being written. Press the Enter button to clear the message. Print or delete Secure Print and Proof Print jobs to free up disk space. The hard disk is being formatted. Data cannot be written to the disk until the formatting is completed. The hard disk is being initialized. Data cannot be written to the disk until the formatting is completed. The fuser has reached its end of life. Install a new fuser. The transfer belt has reached its end of life. Install a new transfer belt. The imaging drum has reached its end of life. Install a new imaging drum. 92 Phaser 1235 Network Color Printers