ZyXEL ARMOR G1 User Guide - Page 121
LABEL, DESCRIPTION, Settings > Expert Mode > LAN > IPv6 LAN
View all ZyXEL ARMOR G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Chapter 11 LAN Figure 71 Settings > LAN > IPv6 LAN The following table describes the labels in this screen. Table 41 Settings > Expert Mode > LAN > IPv6 LAN LABEL DESCRIPTION LAN IPv6 Address Assignment Enable_DHCPv6-PD Select this option to use DHCPv6 prefix delegation. The NBG6818 will obtain an IPv6 prefix from the ISP or a connected uplink router for the LAN. Autoconfiguration Type Select SLAAC + RDNSS to enable IPv6 stateless auto-configuration on this interface. The interface will generate an IPv6 IP address itself from a prefix obtained from an IPv6 router in the network. Select SLAAC + Stateless DHCPv6 to enable IPv6 stateless auto-configuration on this interface. The interface will get an IPv6 address from an IPv6 router and the DHCP server. The IP address information gets through DHCPv6. IPv6 Address range (Start) Select Stateful DHCPv6 to allow a DHCP server to assign and pass IPv6 network addresses, prefixes and other configuration information to DHCP clients. Enter the beginning of the range of IP addresses that this address object represents. NBG6818 User's Guide 121