ZyXEL ARMOR G1 User Guide - Page 126
IPv4 Firewall-Add Rule Screen, Settings, Firewall, IPv4 Firewall, Add Rule, LABEL
View all ZyXEL ARMOR G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Chapter 12 Security Table 42 Settings > Firewall > IPv4 Firewall (continued) LABEL DESCRIPTION Dest IP Address This is the IP address of the computer to which traffic for the application or service is entering. Source IP Address This is the IP address of the computer from which traffic for the application or service is initialized. Dest Port Range This is the port number/range of the destination that define the traffic type, for example TCP port 80 defines web traffic. Source Port Range This is the port number/range of the source that define the traffic type, for example TCP port 80 defines web traffic. Protocol This is the protocol (TCP, UDP or ICMP) used to transport the packets for which you want to apply the firewall rule. Actions Click to remove the firewall rule. Apply Cancel Click to edit the firewall rule. Click Apply to save the settings. Click Cancel to start configuring this screen again. 12.2.1 IPv4 Firewall-Add Rule Screen Use this screen to configure IPv4 firewall rule. Click Settings > Firewall > IPv4 Firewall > Add Rule to open the following screen. Figure 74 Settings > Firewall > IPv4 Firewall > Add Rule NBG6818 User's Guide 126