ZyXEL ARMOR G1 User Guide - Page 132
LABEL, DESCRIPTION, Settings > System > Status Bridge Mode
![]() |
View all ZyXEL ARMOR G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Chapter 13 System Figure 78 Settings > System > Status (Bridge Mode) The following table describes the labels in this screen. Table 46 Settings > System > Status LABEL DESCRIPTION System Model Name This is the model name of your device. Firmware Version This is the firmware version. System Operation Mode This is the device mode in which the NBG6818 is currently running. See Section 13.7 on page 137 for more information. Enable IPv4 Firewall This shows if the IPv4 firewall is enabled on the NBG6818. Enable IPv6 Simple Security This shows if the IPv6 firewall is enabled on the NBG6818. System Uptime This is the total time the NBG6818 has been on. WAN Information Note: : This is not available if you are using bridge mode. MAC Address This shows the WAN Ethernet adapter MAC Address of your device. IP Address This shows the NBG6818's WAN IP address. IP Subnet Mask This shows the NBG6818's WAN subnet mask. Gateway This shows the WAN port's gateway IP address. IPv6 Address This shows the current IPv6 address of the NBG6818. LAN Information MAC Address This shows the LAN Ethernet adapter MAC Address of your device. IP Address This shows the NBG6818's LAN IP address. IP Subnet Mask This shows the NBG6818's LAN subnet mask. NBG6818 User's Guide 132
![](/manual_guide/products/zyxel-armor-g1-user-guide-3c3d66e/132.png)