ZyXEL ARMOR G1 User Guide - Page 41
Bridge Mode Status Screen
![]() |
View all ZyXEL ARMOR G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Chapter 6 Bridge Mode 6.4 Bridge Mode Status Screen Click Settings > System > Status to open the status screen. Figure 19 Settings > System > Status (Bridge Mode) The following table describes the labels shown in the Status screen. Table 6 Settings > System > Status (Bridge Mode) LABEL DESCRIPTION System Model Name This is the model name of your device. Firmware Version This is the firmware version. System Operation Mode This is the device mode to which the NBG6818 is set, see Section 13.7 on page 137 for more information. Enable IPv4 Firewall This shows if the IPv4 firewall is enabled on the NBG6818. Enable IPv6 Simple Security This shows if the IPv6 firewall is enabled on the NB6818. System Uptime This is the total time the NBG6818 has been on. LAN Information MAC Address This shows the LAN Ethernet adapter MAC Address of your device. IP Address This shows the LAN port's IP address. IP Subnet Mask This shows the LAN port's subnet mask. DHCP Server This shows the LAN port's DHCP role - Enable or Disable. IPv6 Address This shows the current IPv6 address of the NBG6818 in the LAN. NBG6818 User's Guide 41
![](/manual_guide/products/zyxel-armor-g1-user-guide-3c3d66e/41.png)