ZyXEL ARMOR G1 User Guide - Page 86
Network > WAN > Internet Connection: PPTP Encapsulation, WAN
![]() |
View all ZyXEL ARMOR G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Chapter 9 WAN The following table describes the labels in this screen. Table 24 Network > WAN > Internet Connection: PPTP Encapsulation LABEL DESCRIPTION Internet Connection Internet Service Provider Type PPTP Username Password PPTP Encryption Type Select PPTP if you want to connect the Internet via point to point tunneling protocol. Enter the user name given to you by your ISP. Enter the password associated with the user name above. Use the drop-down list box to select the type of Microsoft Point-to-Point Encryption (MPPE). Options are: Auto - This ISP account adjusts the encryption type automatically. None - This ISP account does not use MPPE. 40 - This ISP account uses 40-bit MPPE. 128 - This ISP account uses 128-bit MMPE. MTU Size Enter the MTU (Maximum Transmission Unit) size for each packet. If a larger packet arrives, the NBG6818 divides it into smaller fragments. PPTP Server IP Address Enter the IP address of the PPTP server. Auto Connect Select this radio button if the PPTP server did not assign you a fixed IP address. Static IP Select this radio button if the PPTP server assigned an IP address for your Internet connection. IP Address Enter the IP address provided by the PPTP server. IP Subnet Mask Enter the IP subnet mask in this field. Gateway Enter the gateway IP address in this field. DNS Server First DNS Server Second DNS Server Third DNS Server Select User-Defined if you have the IP address of a DNS server. Enter the DNS server's IP address in the field to the right. Select None if you do not want to configure DNS servers. If you do not configure a DNS server, you must know the IP address of a computer in order to access it. WAN IP Address Assignment Obtained from ISP Select this option If your ISP did not assign you a fixed IP address. This is the default selection. Fixed IP Select this option If the ISP assigned a fixed IP address. IP Address Enter your WAN IP address in this field if you selected IP Address. WAN MAC Address Once the WAN MAC address is successfully configured, the address will be copied to the configuration file. It will not change unless you change the setting or upload a different configuration file. Factory Default Select this option to have the WAN interface use the factory assigned default MAC address. By default, the NBG6818 uses the factory assigned MAC address to identify itself. Clone My Computer's MAC Address Select this option to have the WAN interface use a different MAC address by cloning the MAC address of another device or computer. Enter the IP address of the device or computer whose MAC you are cloning. Set WAN MAC Address Select this option to have the WAN interface use a manually specified MAC address. Enter the MAC address in the fields. LAN & WAN Subnet Conflict NBG6818 User's Guide 86
![](/manual_guide/products/zyxel-armor-g1-user-guide-3c3d66e/86.png)