ZyXEL ARMOR G1 User Guide - Page 33
The Web Configurator, NBG6818 User's Guide, Table 4, Settings > System > Status
View all ZyXEL ARMOR G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Chapter 3 The Web Configurator Table 4 Settings > System > Status (Bridge Mode) (continued) LINK TAB FUNCTION USB Application SAMBA Use this screen • Set up file-sharing via the NBG6818 using Windows Explorer or the workgroup name • Configure the workgroup name and create file-sharing user accounts FTP Use this screen to set up file sharing via the NBG6818 using FTP and create user accounts. USB Media Sharing Use this screen to configure settings for media sharing. WiFi Main WiFi Use this screen to enable the wireless LAN and configure wireless LAN and wireless security settings. MAC Filter Use the MAC filter screen to configure the NBG6818 to block access to devices or block the devices from accessing the NBG6818. WPS Use this screen to configure WPS. Scheduling Use this screen to schedule the times the Wireless LAN is enabled. LAN LAN IP Use this screen to configure the NBG6818's LAN IP address and subnet mask. Use this screen to configure the IPv6 address for the NBG6818 on the LAN. System Status General Setting Remote Access Maintenance Operating Mode Logs Use this screen to enable the NBG6818's DHCP server. Use this screen to view the basic information of the NBG6818 Use this screen to change password or to set the timeout period of the management session. Use this screen to enable remote assistant. Use this screen to upload firmware, reboot the NBG6818 without turning the power off or reset the NBG6818 to factory default. Use this screen to select whether your device acts as a router, or a bridge. Use this screen to view the list of activities recorded by your NBG6818. NBG6818 User's Guide 33