ZyXEL ARMOR G1 User Guide - Page 37
Status, LABEL, DESCRIPTION, Settings > System > Status Standard Mode
![]() |
View all ZyXEL ARMOR G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Chapter 5 Standard Mode Figure 15 Settings > System > Status (Standard Mode) The following table describes the labels shown in the Status screen. Table 5 Settings > System > Status (Standard Mode) LABEL DESCRIPTION System Model Name This is the model name of your device. Firmware Version This is the firmware version. System Operation Mode This is the device mode to which the NBG6818 is set, see Section 13.7 on page 137 for more information. Enable IPv4 Firewall This shows if the IPv4 firewall is enabled on the NBG6818. Enable IPv6 Simple Security This shows if the IPv6 firewall is enabled on the NB6818. System Uptime This is the total time the NBG6818 has been on. WAN Information MAC Address This shows the WAN Ethernet adapter MAC Address of your device. IP Address This shows the WAN port's IP address. NBG6818 User's Guide 37
![](/manual_guide/products/zyxel-armor-g1-user-guide-3c3d66e/37.png)