ZyXEL ARMOR G1 User Guide - Page 129
LABEL, DESCRIPTION, Settings > Firewall > IPv6 Firewall > Add Rule
View all ZyXEL ARMOR G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Chapter 12 Security Figure 76 Settings > Firewall > IPv6 Firewall > Add Rule The following table describes the labels in this screen. Table 45 Settings > Firewall > IPv4 Firewall > Add Rule LABEL DESCRIPTION Service Name MAC Address Dest IP Address Enter a name that identifies or describes the firewall rule. Enter the MAC address of the computer for which the firewall rule applies. Enter the IP address of the computer to which traffic for the application or service is entering. Source IP Address The NBG6818 applies the firewall rule to traffic initiating from this computer. Enter the IP address of the computer that initializes traffic for the application or service. Dest Port Range Source Port Range Protocol Apply Cancel The NBG6818 applies the firewall rule to traffic initiating from this computer. This is the port number/range of the destination that define the traffic type, for example TCP port 80 defines web traffic. This is the port number/range of the source that define the traffic type, for example TCP port 80 defines web traffic. Select the protocol (TCP, UDP or ICMP) used to transport the packets for which you want to apply the firewall rule. Click Apply to save the settings. Click Cancel to exist this screen without saving. NBG6818 User's Guide 129