ZyXEL DMA-2500 User Guide - Page 60
Version, 7.10 Reset to Default
View all ZyXEL DMA-2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Chapter 7 Setup 7.9 Version Select Setup > Version to open the Version menu. This menu displays information about the DMA. Figure 19 Setup > Version The following table describes the fields in this menu. Table 12 Setup > Version LABEL DESCRIPTION Reset to Default Use this menu to set the DMA back to the factory default settings. See Section 7.10 on page 60 for details. Firmware Upgrade Use this menu to upload new firmware to the DMA. See Section 7.11 on page 61 for details. Version This is the version of the firmware currently on the DMA. LAN MAC This field displays the MAC address of the DMA's wired Ethernet interface. S/N This is this piece of hardware's Serial Number. 7.10 Reset to Default Select Setup > Version > Reset Settings to open the Reset Settings menu. Use this menu to set the DMA back to the factory default settings. 60 DMA-2500 User's Guide