ZyXEL P-660HW-T1 v3 User Guide - Page 110
Table 22
View all ZyXEL P-660HW-T1 v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Chapter 6 WAN Setup Table 22 Network > WAN > More Connections: Edit (continued) LABEL DESCRIPTION Gateway IP address This option is available if you select ENET ENCAP in the Encapsulation field. Specify a gateway IP address (supplied by your ISP). Connection Nailed-Up Connection Select Nailed-Up Connection when you want your connection up all the time. The ZyXEL Device will try to bring up the connection automatically if it is disconnected. Connect on Demand Select Connect on Demand when you don't want the connection up all the time and specify an idle time-out in the Max Idle Timeout field. Max Idle Timeout Specify an idle time-out in the Max Idle Timeout field when you select Connect on Demand. The default setting is 0, which means the Internet session will not timeout. NAT SUA only is available only when you select Routing in the Mode field. Select SUA Only if you have one public IP address and want to use NAT. Click Edit Detail to go to the Port Forwarding screen to edit a server mapping set. Back Apply Cancel Advanced Setup Otherwise, select None to disable NAT. Click this to return to the previous screen without saving. Click this to save your changes. Click this to restore your previously saved settings. Click this to display the More Connections Advanced Setup screen and edit more details of your WAN setup. 110 P-660HW-Tx v3 Series User's Guide