ZyXEL P-660HW-T1 v3 User Guide - Page 122
The Advanced LAN IP Setup Screen
View all ZyXEL P-660HW-T1 v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Chapter 7 LAN Setup The following table describes the fields in this screen. Table 24 Network > LAN > IP LABEL DESCRIPTION IP Address Enter the LAN IP address you want to assign to your ZyXEL Device in dotted decimal notation, for example, 192.168.1.1 (factory default). IP Subnet Mask Type the subnet mask of your network in dotted decimal notation, for example 255.255.255.0 (factory default). Your ZyXEL Device automatically computes the subnet mask based on the IP Address you enter, so do not change this field unless you are instructed to do so. Apply Click this to save your changes. Cancel Click this to restore your previously saved settings. Advanced Setup Click this to display the Advanced LAN Setup screen and edit more details of your LAN setup. 7.2.1 The Advanced LAN IP Setup Screen Use this screen to edit your ZyXEL Device's RIP, multicast, Any IP and Windows Networking settings. Click the Advanced Setup button in the LAN IP screen. The screen appears as shown. Figure 39 Network > LAN > IP: Advanced Setup 122 P-660HW-Tx v3 Series User's Guide