ZyXEL P-660HW-T1 v3 User Guide - Page 154
Table 40
View all ZyXEL P-660HW-T1 v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Chapter 8 Wireless LAN Click Network > Wireless LAN > WDS. The following screen displays. Figure 57 Network > Wireless LAN > WDS The following table describes the labels in this screen. Table 40 Network > Wireless LAN > WDS LABEL DESCRIPTION Enable WDS Security Select this option and the type of the key used to encrypt data between APs. All the wireless APs (including the ZyXEL Device) must use the same pre-shared key for data transmission. TKIP AES # Active Remote Bridge MAC Address PSK Apply Cancel If you de-select this option, the data sent between APs is not encrypted. Anyone can read it. Select this to use TKIP (Temporal Key Integrity Protocol) encryption. Select this to use AES (Advanced Encryption Standard) encryption. This is the index number of the individual WDS link. Select this to activate the link between the ZyXEL Device and the peer device to which this entry refers. When you do not select the check box this link is down. Type the MAC address of the peer device in a valid MAC address format (six hexadecimal character pairs, for example 12:34:56:78:9a:bc). Enter a Pre-Shared Key (PSK) from 8 to 63 case-sensitive ASCII characters (including spaces and symbols). Click this to save your changes. Click this to restore your previously saved settings. 154 P-660HW-Tx v3 Series User's Guide