ZyXEL P-660HW-T1 v3 User Guide - Page 310
Table 98, Table 99, Table 100, Table 101
View all ZyXEL P-660HW-T1 v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 310 highlights
Chapter 21 Logs Table 98 CDR Logs LOG MESSAGE board %d line %d channel %d, call %d, %s C01 Outgoing Call dev=%x ch=%x %s board %d line %d channel %d, call %d, %s C02 OutCall Connected %d %s board %d line %d channel %d, call %d, %s C02 Call Terminated DESCRIPTION The router received the setup requirements for a call. "call" is the reference (count) number of the call. "dev" is the device type (3 is for dial-up, 6 is for PPPoE, 10 is for PPTP). "channel" or "ch" is the call channel ID.For example,"board 0 line 0 channel 0, call 3, C01 Outgoing Call dev=6 ch=0 "Means the router has dialed to the PPPoE server 3 times. The PPPoE, PPTP or dial-up call is connected. The PPPoE, PPTP or dial-up call was disconnected. Table 99 PPP Logs LOG MESSAGE DESCRIPTION ppp:LCP Starting The PPP connection's Link Control Protocol stage has started. ppp:LCP Opening The PPP connection's Link Control Protocol stage is opening. ppp:CHAP Opening The PPP connection's Challenge Handshake Authentication Protocol stage is opening. ppp:IPCP Starting The PPP connection's Internet Protocol Control Protocol stage is starting. ppp:IPCP Opening The PPP connection's Internet Protocol Control Protocol stage is opening. ppp:LCP Closing The PPP connection's Link Control Protocol stage is closing. ppp:IPCP Closing The PPP connection's Internet Protocol Control Protocol stage is closing. Table 100 UPnP Logs LOG MESSAGE UPnP pass through Firewall DESCRIPTION UPnP packets can pass through the firewall. Table 101 Content Filtering Logs LOG MESSAGE DESCRIPTION %s: block keyword The content of a requested web page matched a user defined keyword. %s The system forwarded web content. 310 P-660HW-Tx v3 Series User's Guide