ZyXEL P-660HW-T1 v3 User Guide - Page 144
WPA2 Authentication - default username and password
View all ZyXEL P-660HW-T1 v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Chapter 8 Wireless LAN Table 32 Network > Wireless LAN > AP: WPA(2)-PSK LABEL DESCRIPTION Idle Timeout The ZyXEL Device automatically disconnects a wireless station from the wired network after a period of inactivity. The wireless station needs to enter the username and password again before access to the wired network is allowed. The default time interval is 3600 seconds (or 1 hour). Group Key Update Timer The Group Key Update Timer is the rate at which the AP (if using WPA(2)-PSK key management) or RADIUS server (if using WPA(2) key management) sends a new group key out to all clients. The rekeying process is the WPA(2) equivalent of automatically changing the WEP key for an AP and all stations in a WLAN on a periodic basis. 8.2.4 WPA(2) Authentication Use this screen to configure and enable WPA or WPA2 authentication. Click the Wireless LAN link under Network to display the AP screen. Select WPA, WPA2 or WPAMixed from the Security Mode list. Figure 50 Network > Wireless LAN > AP: WPA(2) 144 P-660HW-Tx v3 Series User's Guide