ZyXEL P-660HW-T1 v3 User Guide - Page 241
Static Route Edit
View all ZyXEL P-660HW-T1 v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 241 highlights
Chapter 14 Static Route Table 69 Advanced > Static Route LABEL DESCRIPTION Apply Click this to save your changes. Cancel Click this to restore your previously saved settings. 14.2.1 Static Route Edit Use this screen to configure the required information for a static route. Select a static route index number and click Edit. The screen shown next appears. Figure 102 Advanced > Static Route: Edit The following table describes the labels in this screen. Table 70 Advanced > Static Route: Edit LABEL DESCRIPTION Active This field allows you to activate/deactivate this static route. Route Name Enter the name of the IP static route. The text may consist of up to 9 letters, numerals and any printable character found on a typical English language keyboard. Leave this field blank to delete this static route. Destination IP Address This parameter specifies the IP network address of the final destination. Routing is always based on network number. If you need to specify a route to a single host, use a subnet mask of 255.255.255.255 in the subnet mask field to force the network number to be identical to the host ID. IP Subnet Mask Enter the IP subnet mask here. Gateway Type Use either Gateway Address or Gateway Node to configure a static route. P-660HW-Tx v3 Series User's Guide 241