ZyXEL P-660HW-T1 v3 User Guide - Page 240
The Static Route Screen
View all ZyXEL P-660HW-T1 v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
Chapter 14 Static Route 14.2 The Static Route Screen Use this screen to view the static route rules. Click Advanced > Static Route to open the Static Route screen. Figure 101 Advanced > Static Route The following table describes the labels in this screen. Table 69 Advanced > Static Route LABEL DESCRIPTION # This is the number of an individual static route. Active This field indicates whether the rule is active or not. Name Destination Gateway Subnet Mask Modify Clear the check box to disable the rule. Select the check box to enable it. This is the name that describes or identifies this route. This parameter specifies the IP network address of the final destination. Routing is always based on network number. This is the IP address of the gateway. The gateway is a router or switch on the same network segment as the device's LAN or WAN port. The gateway helps forward packets to their destinations. This parameter specifies the IP network subnet mask of the final destination. Click the Edit icon to go to the screen where you can set up a static route on the ZyXEL Device. Click the Remove icon to remove a static route from the ZyXEL Device. A window displays asking you to confirm that you want to delete the route. 240 P-660HW-Tx v3 Series User's Guide