ZyXEL P-660HW-T1 v3 User Guide - Page 323
The Firmware Screen
View all ZyXEL P-660HW-T1 v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 323 highlights
Chapter 22 Tools Table 110 General Commands for GUI-based TFTP Clients (continued) COMMAN D DESCRIPTION Binary Transfer the file in binary mode. Abort Stop transfer of the file. Refer to Section 22.1.2 on page 316 to read about configurations that disallow TFTP and FTP over WAN. 22.2 The Firmware Screen Click Maintenance > Tools to open the Firmware screen. Follow the instructions in this screen to upload firmware to your ZyXEL Device. The upload process uses HTTP (Hypertext Transfer Protocol) and may take up to two minutes. After a successful upload, the system will reboot. See Section 22.1.4 on page 317 for upgrading firmware using FTP/TFTP commands. Do NOT turn off the ZyXEL Device while firmware upload is in progress! Figure 132 Maintenance > Tools > Firmware The following table describes the labels in this screen. Table 111 Maintenance > Tools > Firmware LABEL DESCRIPTION Current Firmware Version This is the present Firmware version and the date created. File Path Type in the location of the file you want to upload in this field or click Browse ... to find it. P-660HW-Tx v3 Series User's Guide 323