ZyXEL P-660HW-T1 v3 User Guide - Page 146
Wireless LAN Advanced Setup
View all ZyXEL P-660HW-T1 v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Chapter 8 Wireless LAN Table 33 Network > Wireless LAN > AP: WPA(2) LABEL DESCRIPTION Port Number Enter the port number of the external accounting server. You need not change this value unless your network administrator instructs you to do so with additional information. Shared Secret Enter a password (up to 31 alphanumeric characters) as the key to be shared between the external accounting server and the ZyXEL Device. The key must be the same on the external accounting server and your ZyXEL Device. The key is not sent over the network. 8.2.5 Wireless LAN Advanced Setup Use this screen to configure advanced wireless settings. Click the Advanced Setup button in the AP screen. The screen appears as shown. See Section 8.8.2 on page 158 for detailed definitions of the terms listed in this screen. Figure 51 Network > Wireless LAN > AP: Advanced Setup The following table describes the labels in this screen. Table 34 Network > Wireless LAN > AP: Advanced Setup LABEL DESCRIPTION RTS/CTS Threshold Enter a value between 0 and 2432. Fragmentation This is the maximum data fragment size that can be sent. Enter a value Threshold between 256 and 2432. Output Power Set the output power of the ZyXEL Device. If there is a high density of APs in an area, decrease the output power to reduce interference with other APs. Select one of the following Maximum, Middle or Minimum. Preamble Select a preamble type from the drop-down list menu. Choices are Long, Short or Dynamic. The default setting is Long. See the appendix for more information. 146 P-660HW-Tx v3 Series User's Guide