ZyXEL P-660HW-T1 v3 User Guide - Page 148
The More AP Screen
View all ZyXEL P-660HW-T1 v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Chapter 8 Wireless LAN The following table describes the labels in this screen. Table 35 Network > Wireless LAN > AP: MAC Address Filter LABEL DESCRIPTION Active MAC Select the check box to enable MAC address filtering. Filter Filter Action Define the filter action for the list of MAC addresses in the MAC Address table. Select Deny to block access to the ZyXEL Device. MAC addresses not listed will be allowed to access the ZyXEL Device Set MAC Address Back Apply Cancel Select Allow to permit access to the ZyXEL Device. MAC addresses not listed will be denied access to the ZyXEL Device. This is the index number of the MAC address. Enter the MAC addresses of the wireless devices that are allowed or denied access to the ZyXEL Device in these address fields. Enter the MAC addresses in a valid MAC address format, that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc. Click this to return to the previous screen without saving. Click this to save your changes. Click this to restore your previously saved settings. 8.3 The More AP Screen This screen allows you to enable and configure multiple Basic Service Sets (BSSs) on the ZyXEL Device. Click Network > Wireless LAN > More AP. The following screen displays. Figure 53 Network > Wireless LAN > More AP 148 P-660HW-Tx v3 Series User's Guide