Brother International HE-800A Instruction Manual - English - Page 30
Changing the treadle unit installation position horizontal positioning only
View all Brother International HE-800A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
4. INSTALLATION Changing the treadle unit installation position (horizontal positioning only) Note: If the machine head is positioned horizontally, install the treadle unit to the motor. 3891Q 3892Q 1. Disconnect the connector (2) of the treadle unit (1) inside the control box. 2. Remove the screw (3), and then disconnect the ground wire. Then, re-tighten just the screw (3). 3. Remove the three screws (4), and then remove the treadle unit (1). 4. Install the V cord bushing (6) to the treadle setting plate (5). 5. Install the treadle setting plate (5) and the treadle unit (1) to the motor with the three screws (4). 6. Install the ground wire with the screw (7). 7. Re-connect the connector (2) of the treadle unit (1) inside the control box. 3893Q HE-800A 22