Brother International HE-800A Instruction Manual - English - Page 33

Lubricating the arm, Lubricating the rotary hook

Page 33 highlights

4. INSTALLATION Lubricating the arm Apply 5-6 drops of oil to the oil inlet (1) at the top of the arm. * When using the machine, check that the oil is visible through the oil window (2). If it cannot be seen, problems such as seizure of the mechanism may occur. 3898Q Lubricating the rotary hook When first installing the machine and when the machine has not been used for an extended period of time, remove the bobbin and add 2-3 drops of oil to the rotary hook race (1) before sewing. 3899Q More Less Rotary hook lubrication adjustment 1. Remove the rubber cap (2). 2. Turn the adjusting screw (3) to adjust the lubrication amount. * Adjust so that approximately 10 drops of oil are released when the sewing machine is run at a speed of 4,000 rpm for three cycles to sew about 114 stitches. Use Kraft paper (4) or similar to catch the oil drops. As a guide, the optimum position can be obtained if the adjusting screw (3) is tightened as much as possible and then loosened about two turns. 3900Q 25 HE-800A

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118

HE-800A
4. INSTALLATION
25
-
17
-
. Lubricating the arm
Apply 5-6 drops of oil to the oil inlet (1) at the top of the
arm.
* When using the machine, check that the oil is visible
through the oil window (2). If it cannot be seen,
problems such as seizure of the mechanism may
occur.
-
17
-
. Lubricating the rotary hook
When first installing the machine and when the
machine has not been used for an extended period of
time, remove the bobbin and add 2-3 drops of oil to the
rotary hook race (1) before sewing.
Rotary hook lubrication adjustment
1. Remove the rubber cap (2).
2. Turn the adjusting screw (3) to adjust the lubrication
amount.
* Adjust so that approximately 10 drops of oil are
released when the sewing machine is run at a speed
of 4,000 rpm for three cycles to sew about 114
stitches. Use Kraft paper (4) or similar to catch the oil
drops. As a guide, the optimum position can be
obtained if the adjusting screw (3) is tightened as
much as possible and then loosened about two
turns.
3898Q
3899Q
3900Q
More
Less