Brother International HE-800A Instruction Manual - English - Page 39
Operating the standing operation pedal option
View all Brother International HE-800A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
5. OPERATION Operating the standing operation pedal (option) Note: Set the circuit board DIP switch 2 - No.1 to ON. (Refer to "13. CHANGING FUNCTIONS USING THE DIP SWITCHES".) Work clamp lifter pedal Start pedal Work clamp pedal Two pedals + Work clamp lifter pedal When the work clamp pedal (left side) is depressed, the work clamp lowers, and when it is depressed once more, the work clamp returns to the neutral position. When the start pedal (right side) is depressed, sewing starts. When the work clamp lifter pedal is pushed toward the outside, the work clamp rises while the pedal is being pushed. (functions in the same way as depressing the treadle backward.) Work clamp lifter pedal 3907Q Start pedal Work clamp pedal Three pedals When the work clamp pedal (middle) is depressed, the work clamp lowers, and when it is depressed once more, the work clamp returns to the neutral position. When the start pedal (right side) is depressed, sewing starts. When the work clamp lifter pedal (left side) is depressed, the work clamp rises while the pedal is being depressed. (functions in the same way as depressing the treadle backward.) 3908Q When circuit board DIP switch 2 - No. 3 is set to ON, you can set the work clamp to lower while the work clamp pedal is being depressed. 31 HE-800A